Aspiration for PJSC "Ukrelevatorprom" (ADM)

Type of work performed:

• Manufacturing of equipment and installation of a dust removal system for the unloading area - 2017.
• Development of a technical solution for dust removal of transport and technological equipment - 2017.
• Development of a section of the project for a control system for dust removal of hopper scales, dumping boxes KL4 and 2 conveyors - February 2013.
• Development of a section of the PU project for dust removal of silo galleries - February 2013.
• Manufacturing and installation of a dust removal system for the SPM-1200 ship loading machine - August 2012.
• Manufacturing of terminal dust removal systems – April 2012
• Modernization of dust filters - September 2009
• Manufacturing and installation of a dust removal system for auto reception (section No. 2) - March 2008.
• Modernization of the car unloading station

Primary goal:

Development of a technical solution for dust removal of vehicle reception (reconstruction - increasing the productivity of transport lines).

Cooperation period:

September 2017

Scope of work:

• Manufacturing of filter equipment.
• Dismantling of old equipment.
• Installation.
• Commissioning works.

Technical means:

• Filter cabinets ZEO-FW-12500.
• Flap system.

Result:

• Reduce electricity consumption by 15%.
• Dust removal coefficient 99.7%.
• Maintaining the cleanliness of the water area of the Odessa seaport and surrounding areas.
• Dust removal SPM-1 200

Primary goal:

Manufacturing and installation of dust removal system SPM-1 200.

Cooperation period:

August 2012

Scope of work:

• Manufacturing of dust cleaning equipment.
• Installation.
• Commissioning works.

Technical means:

• Battery installation of cyclones ZEO-C4.
• Single cyclone ZEO-C1.

Result:

• The use of a unique innovative method for removing dust from a ship-loading machine of the SPM-1200 type made it possible to improve the environmental and sanitary conditions in the port water area.
• The dust removal coefficient was 80% – 85%.
• The dust removal efficiency was 99%.
• Improving sanitary working conditions for workers.
• Car reception dust removal systems

Primary goal:

• Manufacturing and installation of aspiration networks using local filters.
• Manufacturing and installation of aspiration networks for under-silo galleries using cyclone filters produced by ZEO.
• Manufacturing and installation of an aspiration network for automatic reception using a filter cyclone.

Cooperation period:

March 2008

Scope of work:

• Manufacturing of dust cleaning equipment.
• Installation.
• Commissioning works.

Result:

• High dust suppression efficiency.
• The dust removal coefficient was 80% – 85%.
• The dust removal efficiency was 99%.
• Pollution does not exceed permissible standards.
• Compliance with all fire and explosion safety requirements.

Customer comment

Implementation period:

2009-17