The DryTech dryers are devices designed for continuous operation. The drying process is based on the flow of grain through the feeding, drying, cooling and discharge zones. Properly selected burners allow drying from 300 to as much as 4,000 tons of wheat per day. The dryer structure shell is made of Swedish steel.
In the energy-efficient DT dryers, the savings in operation are achieved by full insulation of the drying column, recuperation of part of the warm air, which, after passing through the grain layers, is returned to the air inlet chamber, optimal selection of fans which results in lower electric power consumption, smooth operation of the pneumatic discharge system. The entire process is controlled by microprocessor control selected to the specifics of the drying, allowing full control over the process.
Properly selected modern burners with thermal power in the DT 15 and DT 25 dryers of 800 kW to 5000 kW allow to achieve drying efficiency from 300 to 1600 tons of wheat per day. We also offer the DryTech DT40-DT50 dryers. These are units with significantly higher output. With the use of appropriate burners, they can dry from 1500 to 4000 tons of wheat each day.
The DryTech energy-efficient dryers are designed for drying corn, cereal grains, oilseeds, legumes and other crops. The characteristics of the device are these:
- Low fuel and energy consumption per t/%,
- Economical air heating system,
- Stable and economical drying process,
- Safe and gentle drying temperature,
- High performance for maize grain with low fuel consumption and in harsh weather conditions,
- Very low dust emissions,
- Low noise level,
- Wide and optimal selection of dryer control parameters for each type of grain,
- User-friendly microprocessor control system to control the safety,
- Warning and alert system,
- Convenient and self-explanatory visualization of the dryer,
- Remote online access to the operation visualization,
- Modular, compact and robust design,
- Good positioning at storage facilities.
All work is carried out by experienced technicians and engineers who know our machines inside out. During the servicing, modern equipment is used to quickly and efficiently detect various irregularities. The service includes:
- Installation and commissioning supervision;
- Adjustment work;
- Post-warranty service: securing various components, cleaning or, if necessary, supplying and replacing parts if their wear is already substantial.
