A belt conveyor is a continuously operating conveying device with a working unit in the form of a belt. It is used for transporting bulk cargo in horizontal, inclined (from -10° to + 22°), and horizontal-inclined positions. When moving grain, gentle transportation modes and minimal damage are ensured. The bulk material is fed into a bulk tray with a flow shaper and transported to the discharge point. The open type belt conveyor consists of a drive and belt tensioner, which are connected by conveyor sections with supporting rollers.
- Optimized conveyor dimensions based on trends in the design of modern grain storage complexes and port terminals.
- The use of European-made rollers.
- The use of European-made rubber fabric conveyor belts based on EP pads (polyester (E) in the longitudinal direction and polyamide (P) in the transverse direction), with oil-resistant, antistatic, and flame-retardant properties of rubber covers.
- The use of conical clamping bushings manufactured in-house for keyless connection of the drum to the shaft, significantly facilitating drum repair and allowing for high torque transmission.
- Possibility of transporting products with temperatures up to 120 ⁰C.
- The use of European-made drives with a high service factor.
- Production of drum shafts from alloy steels of Steel 45 and Steel 40X grades, followed by heat treatment.
- Option to equip the conveyor with a weather cover and dust-proof coating.
- Safety fences on both sides of the conveyor as a standard accessory to allow for a rain-free installation.
- Safety sensors included in the standard configuration: belt run-off, belt speed control, and lanyard switch on both sides of the conveyor.
- Possibility of full integration into the ACS of an existing grain processing enterprise.
- An option to design equipment for operating conditions in ATEX 21 and ATEX 22 zones.
|
|
F-series |
L-series |
P-series |
|
Warranty, months |
12 |
18 |
24 |
|
Operation mode |
Concentration at harvest time |
Regularly throughout the year |
Daily and continuously |
|
Gearbox |
Europe (SIEMENS) |
Europe (SIEMENS) |
Europe (SIEMENS) |
|
Electric engine |
Europe |
Europe |
Europe |
|
Bearing unit of the drive and belt tensioner |
Europe (PTI) |
Europe (PTI) |
Europe (PTI) |
|
Rollers |
Europe |
Europe |
Europe |
|
Conveyor belt |
China (SRB) |
China (SRB) |
Europe (Artego) |
|
Drive drum lining |
Europe |
Europe |
Europe |
|
Belt run-off switch |
N/a |
Available |
Available |
|
Speed control sensor |
Available |
Available |
Available |
|
Emergency stop button (L<10 m) |
Available |
Available |
Available |
|
Safety sensor with lanyard switch (L>10 m) |
Available |
Available |
Available |
|
Discharge box |
Available |
Available |
Available |
|
Safety fences |
Available |
Available |
Available |
|
Discharge box lining |
Available |
Available |
Available |
|
Housing material |
|
|
|
|
Coating |
N/a |
N/a |
Polyurethane |
|
RAL |
N/a |
N/a |
5010 |
